Adjusting the Truss Rod
All TGX and Peal guitars come with Adjustable
Truss Rods. On occasion you might need to make a simple
adjustment to the truss rod. (Truss rods do not
normally need adjusting.)
|
Over
Tightened Truss Rod
 |
Loose
Truss Rod
 |
How to Adjust the Truss Rod
Step 1:
Loosen all the guitar strings.
Step 2: Separate the 3rd
and 4th strings.
Step 3: Insert the
wrench into the end of the truss rod.
Step 4: Turn the wrench
slightly. You should not need to turn more than 1/4 of a
turn. For loose neck, you will need to tighten the truss rod
by turning clockwise. If the neck is bowing and over
tightened, you will need to turn the wrench up to a 1/4 of a
turn counter-clockwise.
Note: A broken truss rod will terminate the
warranty for your guitar. If you are uncomfortable with
the adjustments,
contact us.
|
